Memphis Audio MS60C

Memphis Audio MS60C

M Series oversized 6-1/2″ component speaker system

Features & specs

General

Speaker Size	6 1/2 O/S
Design	2-way
Tweeter Design	Dome
Impedance (Ohms)	4
Tweeter Composition	Aluminum
Woofer Composition	Carbon Fiber
Woofer Surround/td>	Rubber
Parts Warranty	1 Year
Labor Warranty	1 Year

Specifications

Sensitivity (1W at 1 meter)	89
Sensitivity at 2.83 volts	N/A
Frequency Response	72 – 20k Hz
Minimum RMS Wattage	—
Maximum RMS Wattage	75
Peak Power Handling (Watts)	150
Top-mount Depth (Inches)	2 9/16
Bottom-mount Depth (Inches)	2 11/16
Cutout Diameter or Length (inches)	5 5/8
Mounting Height (Inches)	0.267

The Memphis Audio MS60C replaces this item:

Memphis Audio 15-MCX60C

Product Research

Features:

Woofer Size Classification: Memphis Audio describes this woofer as an oversized 6½”. Because it requires a larger cutout than a standard 6½” speaker, Crutchfield has traditionally referred to this size speaker as a 6¾”. Please enter you vehicle information to confirm fit in your vehicle.

Phase Plug: The phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.

Tweeter Mounting: The tweeters offer multiple mounting options; choose flush mount, surface mount, or angled surface mount. The tweeters are shipped in the flush mount housings and the angled surface mount housings are included. The back of the flush mount housing and the top of the angled surface mount housing combine to create the (non-angled) surface mount housing. Once installed in any of the housings, the tweeter will pivot slightly to optimize imaging.

Tweeter Dimensions:

Crossover: The crossover’s inputs and outputs are screw terminals that will accept bare wire or spade connectors up to 0.315″ wide. The tweeter output level can be changed by moving a jumper pin inside each crossover; choose -3 dB or 0 dB (flat).

Crossover Dimensions:

• Width: 2¾”
• Height: 1½”
• Depth: 4¾”